Installation Steps, Overview - Fujitsu Primergy CX400 S2 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server
enclosure. Links take you to sections where you can find more detailed
information about the respective steps:
Ê First of all, carefully read the safety instructions in
page 21.
Ê Transport the server enclosure to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the server enclosure. For mounting refer to the original component
documentation.
Ê Mount the server enclosure into the rack (see
enclosure in/from the rack" on page
Ê Wire the server enclosure. Follow the instructions in sections
additional server node to the server enclosure" on page 39
connecting/disconnecting cables" on page
Ê Connect the server enclosure to the mains (see section
server enclosure to the mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server enclosure (see section
CX400 S2
"Unpacking the server enclosure" on page
9); print out the PDF files if required.
37).
"Controls and indicators" on page
Operating Manual
"Important information" on
"Documentation
"Installing/removing the server
43.
"Connecting the
41).
36).
"Installing an
and "Notes on
49).
19