Adding The System To The Network; Verify Your Settings; Adjusting The Date And Time Settings - TANDBERG C20 Administrator's Manual

Quick Set C20/C20plus
Contents Introduction
Contents Introduction
4

Adding the system to the network

Your service provider should have provided you with the information you need to
get online.
For H.323 type of communication, this will include such things as system
name, H.323 alias, gatekeeper address, etc.
For SIP type of communication, similar type of information will be supplied.
For networks administrated through TMS (TANDBERG Management Suite),
your TMS administrator will be able to assist you when configuring.
The H.323 and SIP profiles are configured from the Advanced configurations
menu:
Navigate to Settings > Advanced > Advanced configuration and make a search
for H323 or SIP, or select H323 > Profile 1 or SIP > Profile 1 from the menu
Expand the items in need of modification and enter the information supplied by
your service provider.
ADVANCED CONFIGURATION
D14489.01—JULY 2009
Getting started About the menus
Getting started Getting started About the menus
Configure the H.323 Profile in the
Advanced configuration menu
Configure the SIP Profile in the
Advanced configuration menu
ADVANCED CONFIGURATION
firstname.lastname@company.com
Advanced settings Settings library
Advanced settings Settings Library
5

Verify your settings

We strongly recommend that you verify the settings by inspecting the System
Information list.
You do this by accessing the System Information in the same way as you did
when you verified you IP address setting.
1. Navigate to Settings > System Information
2. Verify the previous configurations.
If you successfully registered to a Gatekeeper the
Registered. If the registration failed the
If you successfully registered to a SIP server the
Registered. If the registration failed the
3. Press Home (
6

Adjusting the date and time settings

Verify the date and time to see if the date and time settings need to be adjusted.
The date and time is located in the upper right corner on screen.
How to adjust the date and time settings:
1. Navigate to Settings > Date and time
2. When Set date and time is set to Auto there will be an automatic update of
the date and time settings. If you want to manually adjust the date and time
settings, select Manual and enter the Day, Month, Year and Time. After
having adjusted the settings manually you can set the Set date and time
back to Auto for automatic update.
3. Select the appropriate Time zone from the list of GMT time zones.
4. Select the appropriate Date format from the list.
5. Select the appropriate Time format from the list.
6. Press Home (
Cameras Appendices
Cameras Appendices
Status will show
Status will show Not registered.
Status will show
Status will show Not registered.
) to exit.
) to exit.
Administrator Guide
Contact us
Contact us
15