Event Logging Submenu - Fujitsu Stylistic ST5000 Series Technical Reference Manual

Event Logging Submenu

The Event Logging Submenu allows you to configure DMI (Desktop Management Interface) event logging options.
To access this submenu, select Event Logging Submenu from the Advanced menu.
Event Log Capacity:
Event Log Validity:
View Event Log:
Event Logging:
System Boot Event:
Clear All Event Logs:
Mark Events as Read:
F1 Help
ESC Exit
Option
Event Log Capacity -----
Event Log Validity -----
View Event Log Enter
Event Logging Disabled
Enabled
System Boot Event Disabled
Enabled
Clear All Event No
Logs Yes
Mark Events as Enter
Read
PhoenixBIOS Setup Utility
Exit Submenu
Event Logging
Space Available
Valid
[Enter]
[Enabled]
[Disabled]
[No]
[Enter]
Select Item -/Space
Select Menu Enter
Table 2-11. Event Logging Submenu Options
Settings
Status of the event log is displayed.
Indicates whether data in the event log is valid.
Press the <Enter> key or select the [Enter] option to view the contents of the
event log.
Determines whether DMI event logging is enabled.
This option is only available when [Enabled] is selected for Event Logging.
When [Enabled] is selected, the event may be logged.
When [Disabled] is selected, the event is ignored.
Choose [Yes] to clear all DMI event logs at the next boot. (This setting is reset to
No after the event logs are cleared.)
Press [Enter] or press the <Enter> key to mark all events currently in the event log
as read. Marked events will not be displayed the next time View Event Log is
selected.
Item Specific Help
Press <Enter> key to
view the contents of
the event log.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
Description
BIOS Setup Utility
2
19