Cable Wiring - Zenoah HB2311EZ Workshop Manual

4-16 Cable Wiring

Switch Cord Wiring
Cords
Grommet
Switch Cord Wiring
Cord
Grommet
Cords
Clamp
High Tension Cord Wiring
Clamp
High Tension
Cord
4. Service Guide
● Insert the grommet to align with the volute case
notch and clamp the cord between the protrusions
as shown in the figure at left.
CAUTION
Check that the cord on the module side is not
caught between volute case and crankcase.
● Pay attention that the cord is not caught against the
engine cover when it is installed.
● Align the cord along the guide, and insert the
grommet to align with the volute case notch.
CAUTION
Check that the cord on the module side is not
caught between volute case and crankcase.
● Set the lead cords and clamp them as shown in the
figure at left.
CAUTION
Align the cord not to interfere with the clamp
mounting screw.
● Pay attention that the cord is not caught against the
engine cover when it is installed.
EB4300/ 6200, EB70 Series, EBZ4800, EBZ51/ 71/ 80 Series
Insert the grommet to align with the crankcase's notch
and align the high tension cord and secure it with the
clamp as shown in the figure at left.
CAUTION
Align the high tension cord not to interfere
with the crankcase or the clamp mounting
screw.
Grommet
Crankcase
HB23 Series, HBZ26 Series
EBZ30 Series
30