Zenoah HB2311EZ Workshop Manual page 37

Switch Cord Assembly
Connector
Module's terminal
Switch Cord Assembly
Module
【 【 【 【 EBZ5100】 】 】 】
Terminal
Contact
Switch Cord
Crankcase's
protrusion
Terminal
Switch Cord
【 【 【 【 EBZ4800, EBZ5100Q, EBZ71/ 80 Series】 】 】 】
29
4. Service Guide
Module
Switch Cord
Terminal
Connector
Module
Connector
EB4300/ 6200, EB70 Series
● Secure the switch cord terminal with the module
mounting bolt.
CAUTION
Ensure the cord is not bent nor interfering
with the crankcase when the module mount
bolt is tightened.
● Bends the terminal of the module, fit the switch
cord connector firmly to the module's terminal.
CAUTION
Bend the module's terminal until the cord is
clear of the crankcase.
EBZ4800, EBZ51/ 71/ 80 Series
● Secure the switch cord terminal with the module
mounting bolt.
CAUTION
Bring the terminal into contact with the
crankcase's protrusion then tighten it.
● Fit the switch cord connector firmly to the module's
terminal.