Ford F-150 2010 Owner's Manual page 87

On vehicles with memory feature, to prevent damage to the steering
column, the steering column is designed to set a stopping position just
short of the end of the column position. If the steering column
encounters an object while moving up or down, a new stopping position
will be set. To reset the steering column to its normal stopping position:
• After encountering the new stopping position, press the steering
column control again to override.
• Continue pressing the control until it reaches the end of the column
position.
• A new soft stop will be automatically set. The next time the steering
column is tilted it will stop just short of the end of the column
position.
ILLUMINATED VISOR MIRROR (IF EQUIPPED)
Lift the mirror cover to turn on the
visor mirror lamp.
Slide-on-rod feature
The visor will slide back and forth
on the rod for increased sunlight
coverage. Rotate the visor towards
the side window and extend it
rearward for additional sunlight
coverage.
Note: To stow the visor back into
the headliner, visor must be
retracted before moving it back
towards the windshield.
Driver Controls
87