Adding Engine Oil; Engine Oil And Filter Recommendations - Ford 2003 Mustang Owner's Manual

Maintenance and Specifications

Adding engine oil

1. Check the engine oil. For instructions, refer to
Checking the engine oil in this chapter.
2. If the engine oil level is not within the normal
range, add only certified engine oil of the
recommended viscosity. Remove the engine oil filler
cap and use a funnel to pour the engine oil into the
opening.
3. Recheck the engine oil level. Make sure the oil
level is not above the MAX mark on the engine oil
level indicator (dipstick).
4. Install the indicator and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the
filler cap clockwise 1/4 of a turn until three clicks
are heard or until the cap is fully seated.
To avoid possible oil loss, DO NOT operate the
vehicle with the engine oil level indicator
and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this
certification trademark.
Use SAE 5W-20 engine oil.
Only use oils "Certified For Gasoline Engines" by the
American Petroleum Institute (API). To protect your
engine's warranty use Motorcraft SAE 5W-20 or an
equivalent 5W-20 oil meeting Ford specification
WSS-M2C153–H. SAE 5W-20 oil provides
optimum fuel economy and durability
performance meeting all requirements for your
vehicle's engine.
Do not use supplemental engine oil additives,
cleaners or other engine treatments. They are
163
2003 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)