Operating Instructions - Hamilton Beach Flatbread MealMaker Express Operating Instructions Manual

Operating Instructions

Before first use, wash the Cover and Bread Paddle in hot, soapy water.
Rinse and dry. Use a hot, damp cloth to wipe the Griddle and both upper
and lower surfaces of the Press.
Select a flatbread and filling
recipe to prepare.
1
1
Plug unit into 120 volt AC
outlet.
2
2
3
3
Line up pin on Handle shaft
with slot in upper plate.
Insert Handle into Flatbread
MealMaker Express. This is
the unlocked position. The
Handle will rotate freely if
properly inserted.
4
•
Operating Instructions
4
4
Push the Handle down, then
rotate clockwise to lock onto
the Latching Pin. Turn the
Press Switch on to preheat.
The Press Indicator Light will
stay on constantly. The Bread
Paddle should remain in the
Press so it will preheat.
Turn on the Griddle to preheat.
Keep Cover on to preheat. As
5
5
the Griddle heats and cools to
maintain the set temperature,
the Griddle Indicator Light will
cycle on and off.
The Press and Griddle should
be preheated in about 10
6
6
minutes.