Starting Up/Shutting Down
Using the Touch Pad
Work Surface
Right Button
Left Button
12
3
Select your application
You are able to start working on your computer.
NOTE
The power saving function is factory set, so if there is no input from a key, the
touch pad, or the touchscreen for two minutes. The LCD is powered off (ECO
mode).
The LCD will resume operation when the touch pad or the touchscreen is used or
a key is pressed.
[System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager] may contain a device or devices bearing an exclamation mark or ques-
tion mark. This does not indicate a malfunction. Such a mark (exclamation or
question mark) will not be displayed if the operating environment of the device
showing the mark is corrected, by for instance installing the driver of the device.
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to handle the touch pad, refer to page 15.
The touch pad has the following two modes of operation.
®
Microsoft
IntelliMouse
(Setting at the time of purchase)
Wheel mode operations (almost identical to
the case of using the Microsoft
for scroll, zoom, etc., operations) are possible
for Microsoft
®
wheel function-compatible ap-
plications.
®
TM
Microsoft
IntelliMouse
is a mouse-type de-
vice that, in addition to the two conventional
buttons, incorporates a wheel able to rotate
forwards/backwards.
Scrolling Area
Scrolling up/down
For the Pan and Auto Scroll functions, the entire
work surface of the touch pad can be used for scroll-
ing.
: Typical mouse operations use this area.
When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and [Verti-
cal] of [Scroll Configuration], the entire surface can be used for typical mouse opera-
tions.
NOTE
When you are not sure whether an application is compatible with the Microsoft
function or not, try using both modes. Furthermore, depending on the application, there are
cases where scrolling may not be possible with either mode.
Changing the mode of the touch pad
1 Select
from the taskbar and then select [Motion] or select [Motion] in [Start] - [Set-
tings] - [Control Panel] - [Mouse].
2
To set the Microsoft
Add the check mark
To set the original mode
Delete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration] and
add the check mark
3 Press [OK].
TM
Wheel Mode
Only scroll operation is possible for appli-
®
TM
IntelliMouse
cations not compatible with the Microsoft
wheel function.
Even for applications compatible with the
Microsoft
where only vertical scrolling or only hori-
zontal scrolling is possible in this mode.
Scrolling Area
Scrolling side-to-side
Possible when a check mark
is added for [Horizontal].
®
IntelliMouse
TM
Wheel mode
for [IntelliMouse Wheel mode] of [Scroll Configuration].
for [Horizontal] and/or [Vertical] .
Original Mode
®
wheel function, there are cases
Scrolling up/down
Possible when a check mark
is added for [Vertical].
®
wheel
®