Setting the song track volume
To set the volume of each song track, proceed as follows:
1.
Press the [MIXER] button to open the MIXER menu.
ð The display shows the parameter 'KITVol:' and the number and current volume of
the selected drum kit.
2.
Press the [PAGE +] button.
ð The display shows the parameter 'SongVol:' and the current volume.
3.
Press the [SAVE/ENTER] button.
ð The display successively shows the various parameters (see the following table) and
the current volume.
4.
Adjust the desired volume of a track using the [+] / [–] buttons or the jog wheel.
5.
Use the [PAGE +] or [PAGE –] button to jump to the next or previous parameter.
6.
Conclusively save the settings with [SAVE/ENTER].
MPS-600
Operation
43