Garmin GTX 320 Installation Manual page 26

3. Control, Operation Information
Refer to the GTX 320/320A Pilot's Guide.
4. Servicing Information
N/A
5. Maintenance Instructions
Maintenance of the GTX 320/320A is 'on condition' only. Periodic maintenance is not required. Refer to the
GTX 320 and the 320A Series Maintenance Manuals.
6. Troubleshooting Information
Refer to the GTX 320 and the GTX 320A Maintenance Manuals.
7. Removal and Replacement Information
Refer to section 2.4 of this manual. If the unit is removed and reinstalled, a functional check of the equipment
should be conducted in accordance with section 3.2 of this manual.
8. Diagrams
Refer to Appendix B of this manual.
9. Special Inspection Requirements
N/A
10. Application of Protective Treatments
N/A
Data: Relative to Structural Fasteners
11.
Antenna installation, removal and replacement should be in accordance with applicable provisions of
AC43.13-1A and 43.13-2A. Also, refer to section 2.3 of this manual.
12. Special Tools
N/A
13. This Section is for Commuter Category Aircraft Only
A.
Electrical loads: Refer to section 1.3 of this manual.
B. Methods of balancing flight controls: N/A.
C. Identification of primary and secondary structures: N/A.
D. Special repair methods applicable to the airplane: Antenna installation, removal, and replacement should
be in accordance with applicable provisions of AC43.13-1B and 43.13-2A.
14. Overhaul Period
No additional overhaul time limitations.
15. Airworthiness Limitation Section
N/A.
Page A-2
Rev M
GTX 320/320A Installation Manual
190-00133-01