Mixer (Master Section) - Yamaha MT8X Operation Manual

MIXER (MASTER SECTION)

GROUP MASTER Controls
These controls are used to adjust the level of each
group when the signals from each group bus are to
be recorded to tape. The signals adjusted by these
controls are sent to the tracks selected by the REC
SELECT switches.
STEREO Fader
The MASTER fader adjusts the level of the stereo
bus signals.
The optimum position is at "7-8" on the scale.
MONITOR/PHONES Control
This control is used to adjust the sound output level
at the PHONES jack on the front panel and at the
MONITOR OUT jacks on the rear panel.
MONITOR SELECT Switches
These switches are used to monitor the group bus
and stereo bus signals, signals input to the 2TR IN
jacks and the playback signals of the cassette tape.
If all switches are pressed, all of the signals can be
simultaneously monitored.
GROUP
Each of these switches is used to monitor the bus
signals for groups 1 and 3 or groups 2 and 4 in
monaural.
If both the switches are pressed, signals can be
monitored in stereo; groups 1 and 3 for channel L
and groups 2 and 4 for channel R.
STEREO
This switch is used to monitor the stereo bus
signals.
2TR IN
This switch is used to monitor the signals input to
the 2TR IN jacks.
CUE
This switch is used to monitor the playback
signals on tracks of the cassette tape.
For a track being recorded, the recording signals
will be monitored.
AUX RTN LEVEL Controls
These controls are used to adjust the level of the
signals input to the AUX RETURN jacks.
AUX RTN ASSIGN Switches
These switches are used to select the group bus to
which the signals from the AUX RETURN jacks will
be sent. On the other hand, signals are always sent
to the stereo buses.
9