Check The Pci Bracket - 3Com 3CRPCIN175 Quick Installation Manual

4 Check the Package Contents
■
■

Check the PCI Bracket

The standard PCI bracket to which the PCI Adapter is attached by
default is for standard, full-height desktops. If you are using a
low-profile desktop, you need to replace the standard bracket
with the low-profile bracket for the PCI Adapter to fit.
To replace the PCI bracket:
1 Remove the three nuts and washers attached to the three
threaded antenna connectors.
2 Remove the two screws that secure the PCI Adapter to the
bracket. (Be careful not to let the shielding cover fall off, as these
screws also hold that in place.) Save the screws.
3 Replace the standard bracket with the low-profile bracket.
4 Fasten the PCI Adapter to the low-profile bracket with the screws.
5 Replace the three nuts and washers that you removed in step 1.
7 MB of free disk space
CD-ROM drive