Starting The Engine - KYMCO MYROAD 700i Owner's Manual

Starting the engine

Always follow the proper starting procedure
described here and on the following pages.
CAUTION
To protect the catalytic converter in your
scooter's exhaust system, avoid idling for
extending periods of time and do not use leaded
gasoline.
3
CAUTION
To prevent damage to the starter motor, do not
operate the starter motor for more than five
seconds at a time. If the scooter fails to start
immediately, check the fuel level and the battery
condition, and allow the starter motor to cool
before attempting to start the engine again.
1. Place your scooter on its center stand and put
the side stand up.
2. Insert the ignition key and rotate the ignition
" "
switch to
33
OPERATION
ON.