Epson Office T30 Getting Started Manual page 4

IMPORTANT – READ CAREFULLY:
This PROCESS LICENSE AGREEMENT ("PLA") is a legal agreement between you and Sawgrass
Technologies, Inc. ("Sawgrass"). By installing the ChromaBlast Ink in your printer, or otherwise
using the Sawgrass ChromaBlast Ink, you agree to be bound by the terms of this PLA. If you
do not agree to the terms of this PLA, Sawgrass is unwilling to license the process of using
the ChromaBlast Ink to you. In such event, you may not use the ChromaBlast Ink, and you
should promptly contact your supplier for instructions on return of the unopened package.
The process of using the ChromaBlast Ink is protected by U.S. and foreign patents.
Sawgrass will provide a complete list of the relevant patents upon request.
of the ChromaBlast Ink to practice the patented process is permitted by this license.
GRANT OF LICENSE — This PLA grants you the following rights: You may install and use the
ChromaBlast Ink packaged herewith in your EPSON printer to practice the printing process
described in U.S. Patent No. 5,488,907. The use of any ink, dye, or pigment to practice the Sawgrass
Process, other than a ChromaBlast Ink purchased from Sawgrass or its authorized distributor
accompanied by a PLA, is not a licensed use of the Sawgrass Process. No rights to use the Sawgrass
Process, except those specified herein, are granted, and no rights to use any other process,
product, software, or hardware developed or sold by Sawgrass are granted or implied hereby.
LIMITATIONS ON REVERSE ENGINEERING — You agree that you will not attempt to reverse
engineer, reproduce, or deformulate the ChromaBlast Ink.
PATENTS AND COPYRIGHTS — Sawgrass owns multiple U.S. and foreign patents which
apply to the Sawgrass Process and/or the ChromaBlast Ink or its use. All patents in and to
the ChromaBlast Ink and the method of using the ChromaBlast Ink are owned by Sawgrass
Technologies, Inc. You may not copy the printed materials accompanying the ChromaBlast Ink.
All rights not specifically granted under this PLA are reserved by Sawgrass Technologies, Inc.
Made In U.S.A.
CAUTION:
• For best printing results, use the ink within six months of purchase. Please refer to the
individual ink bag/cartridge for the specific ink expiration date.
• Keep out of reach of children.
• Do not expose ink to temperatures above 100° F or below 40° F.
• Keep ink out of direct sunshine.
Sawgrass Technologies, Inc. agrees to replace any defective ink within a reasonable time, which
shall be Sawgrass' sole responsibility for errors or defects in these goods.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY
OF FITNESS FOR A PARTICULAR PURPOSE. SAWGRASS SHALL NOT BE LIABLE FOR LOSS
OF PROFIT OR OTHER ECONOMIC LOSS, OR FOR INDIRECT, SPECIAL, CONSEQUENTIAL OR
OTHER SIMILAR DAMAGES.
iv
Sawgrass Technologies, Inc. ~
The use
www.sawgrassink.com