4. Troubleshooting
4-3. Factory Mode Adjustments
4-3-1 How to Access Service Mode
Using the Customer Remote
1.
Turn the power off and set to stand-by mode
2.
Press the remote buttons in this order; MUTE-1-8-2-POWER ON to turn the set on.
3.
The set turns on and enters service mode. This may take approximately 20 seconds.
4.
If you fail to enter service mode, repeat steps 1 and 2 above,
press the Power button to exit and store data in memory.
5.
Initial SERVICE MODE DISPLAY State
Option
ADC/WB
Control
Advanced
Expert
T-STL3FHUSHC-XXXX
DTP-LP-XXXX-XX
DTP-LP-App-XXXX-XX
ADC : HDMI X COMP X PC X AV X
EDID : SUCCESS
HDCP : SUCCESS
Build Date : XX-XX-XXXX
Date Of Purchase : XX/XX/XX
6. Buttons operations withn Service Mode
Menu
Direction Keys
/
Direction Keys
/
Source
*How to access the Advanced menu setup.
- While in the factory menu, navigate the cursor and highlight advanced.
On the remote keypad hit the zero key 4 times.
The Advanced menu will then be active for adjustment if wanted.
4-26
Full Menu Display/Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase / Decrease for the Selected Item
Cycles through the active input source that are connected to the unit