Cambridge SoundWorks DTT3500 Digital User Manual page 23

Using set-top DVD player or
PlayStation 2
Select OPTICAL or COAXIAL
using the DOLBY DIGITAL/PCM
AUDIO input selection button.
For movies with Dolby Digital (AC-3)
soundtracks
This signal is detected automatically
and the DOLBY DIGITAL LED
lights up. You will experience Dolby
Digital 5.1-channel output.
For 2-channel movies which are
Dolby Surround-encoded carried
within the Dolby Digital compressed
bitstream
The Dolby Pro Logic decoder will
automatically decode the program
for 5.1-channel movie experience.
For 2-channel DVD movies which
are Dolby Surround-encoded
The Dolby Pro Logic decoder will
automatically decode the program
for 5.1-channel movie experience.
Playing VCD Movies
Using PC-DVD player on PC
Select the COAXIAL input using the
DOLBY DIGITAL/PCM AUDIO
input selection button.
Using SoftMPEG player or
PlayCenter on PC
1. Select LINE IN or DIGITAL DIN
input using the MULTI-CHANNEL
button.
2. Select the Movie mode by
pressing the CMSS button until
the LED for Movie mode lights
up.
This mode lets you experience
the surround sound with 5.1-
channel output; all dialog and
central sounds will be heard
through the center speaker, while
music and off-stage sounds are
heard through the other four
satellites.
3. If you are using PlayCenter to
play the VCDs, disable all
CMSS effects in your PlayCenter
- use only DTT3500 Digital's
Movie mode.
Using set-top VCD player
1. Select LINE IN input using the
MULTI-CHANNEL button.
2. Select the Movie mode by
pressing the CMSS button until
the LED for Movie mode lights
up. You can experience surround
sound instead of mono/stereo
sound; all dialog and central
sounds will be heard through the
center speaker, while music and
off-stage sounds are heard
through the other four satellites.
For VCD movies with Dolby
Surround-encoded stereo program
Use the Dolby Pro Logic decoder for
5.1-channel movie viewing
experience.
For source connected to OPTICAL/
COAXIAL/DIGITAL DIN:
1. Select OPTCAL/COAXIAL/
DIGITAL DIN input using the
DOLBY DIGITAL/PCM AUDIO
button.
2. Press the DOLBY PRO LOGIC
button until the DIGITAL IN
LED lights up.
For source connected to ANALOG
LINE IN
1. Select LINE IN input using the
MULTI-CHANNEL button.
2. Select ANALOG IN using the
DOLBY PRO LOGIC button.
CD Audio Music
Enjoying CD Audio on PC
1. Select LINE IN or DIGITAL DIN
input using the MULTI-CHANNEL
button.
2. Select the Music mode by
pressing the CMSS button until
the LED for Music mode lights
up. This mode creates an
enveloping five-speaker surround
effect that enhances stereo
music.
23