Fitting Optional Rack-Mount Brackets; Dimensions - SoundCraft MPMi User Manual

FITTING OPTIONAL RACK-MOUNT BRACKETS

The rack-mount kit is included with the MPMi 12 channel.
WARNING: ensure that the mixer is disconnected from the mains supply
and all other equipment before fitting the rack-mounting brackets.
Remove the screws at points
Remove the screw at point
Attach the rack brackets to both sides of mixer at points

DIMENSIONS

MPMi 12 Channel
MPMi 20 Channel
A
, repeat on the other side of the mixer.
B1
Keep the side mouldings in case you want to re-fit them at a later date.
DIMENSION "X"
DIMENSION "Y"
DIMENSION "X" DIMENSION "Y"
482mm 432mm
688mm 638mm
(MPMi 12 Channel)
and remove the side mouldings.
A
B2 with the screws
removed at
B2
A and B1 above.
B1
93.52mm
27