Miele G1000 Technical Information page 144

Technical Information
Flashing
Rhythm of
Function
Intake/Drain
Lt.
Pos. 26:
Long Short
Add second
interim rinse
2 6
Pos. 27:
Long Short
Extended
drying time
2 7
Pos. 36:
Long Short
Machine
height
setting *1
3 6
Table 6-27: G1180 / G2180 Programming Mode Options (Cont. from Table 6-26) (Cont. on Table 6-28)
Programming
Press the Program The Intake/Drain
button 26x. LED flashes 2x
long and 6x briefly
To change the intermittently.
setting, press the
Program button The SaniWash
and hold it until the LED is off =
Intake/Drain LED program cycle per
flashes. Then press factory setting; The
the Program button SaniWash LED
to enter the desired flashes = second
setting changes. *2 interim rinse is
added.
Press the Program The Intake/Drain
button 27x LED flashes 2x
long and 7x briefly
To change the intermittently.
setting, press the
Program button The SaniWash
and hold it until the LED if off = normal
Intake/Drain LED drying (factory
flashes. Then press setting); the
the Program button SaniWash LED
to enter the desired flashes = enhanced
setting changes. *2 drying.
Press the Program The Intake/Drain
button 36x. LED flashes 3x
long and 6x briefly
To change the intermittently.
setting, press the
Program button The SaniWash
and hold it until the LED is off = normal
Intake/Drain LED machine height
flashes. Then press (G1xxx). The
the Program button SaniWash LED
to enter the desired flashes = XXL units
setting changes. *2 (G2xxx).
144
G1000 / G2000 Dishwashers
Flashing Rhythm of
Indication
SaniWash LED
Long
-
-
Long
-
-
Long
-
-
Short Display
- P0
1 P1
Short Display
- P0
1 P1
Short Display
- P0
1 P1