Installation; Grounding Instructions; Radio Interference - Whirlpool Microwave oven Instructions For Use Manual

Whirlpool microwave oven instructions for use
Hide thumbs Also See for Microwave oven:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION

1. Make sure that all the packing materials are
removed from the inside of the door.
2.
WARNING: Check the oven for any
damage, such as misaligned or bent door,
damaged door seals and sealing surface, broken
or loose door hinges and latches and dents
inside the cavity or on the door. If there is any
damage, do not operate the oven and contact
qualified service personnel.
3. This microwave oven must be placed on a flat,
stable surface to hold its weight and the
heaviest food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture, or
high humidity are generated, or near
combustible materials.

GROUNDING INSTRUCTIONS

This appliance must be grounded. This oven is
equipped with a cord having a grounding wire with
a grounding plug. It must be plugged into a wall
receptacle that is properly installed and grounded.
In the event of an electrical short circuit, grounding
reduces risk of electric shock by providing an
escape wire for the electric current. It is
recommended that a separate circuit serving only
the oven be provided. Using a high voltage is
dangerous and may result in a fire or other
accident causing oven damage.
WARNING Improper use of the grounding
plug can result in a risk of electric shock.

RADIO INTERFERENCE

Operation of the microwave oven can cause
interference to your radio, TV, or similar
equipment.
When there is interference, it may be reduced or
eliminated by taking the following measures:
1. Clean door and sealing surface of the oven.
2. Reorient the receiving antenna of radio or
television.
5. For correct operation, the oven must have
sufficient airflow. Allow 20cm of space above
the oven, 10cm at back and 5cm at both sides.
Do not cover or block any openings on the
appliance. Do not remove feet.
6. Do not operate the oven without glass tray,
roller support, and shaft in their proper
positions.
7. Make sure that the power supply cord is
undamaged and does not run under the oven or
over any hot or sharp surface.
8. The socket must be readily accessible so that it
can be easily unplugged in an emergency.
9. Do not use the oven outdoors.
Note
1. If you have any questions about the grounding
or electrical instructions, consult a qualified
electrician or service person.
2. Neither the manufacturer nor the dealer can
accept any liability for damage to the oven or
personal injury resulting from failure to observe
the electrical connection procedures.
The wires in this cable main are colored in
accordance with the following code:
Green and Yellow = EARTH
Blue = NEUTRAL
Brown = LIVE
3. Relocate the microwave oven with respect to
the receiver.
4. Move the microwave oven away from the
receiver.
5. Plug the microwave oven into a different outlet
so that microwave oven and receiver are on
different branch circuits.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents