Setting Up The Windows Printing - Toshiba GA-1040 Operator's Manual
Digital plain paper copier network printer board printer function
Hide thumbs
Also See for GA-1040:
- Operator's manual (122 pages) ,
- Operator's manual (102 pages) ,
- Operator's manual (100 pages)
Table of Contents
Advertisement
SETTING UP THE WINDOWS PRINTING
When you print using the SMB printing, you must configure the Windows Printing settings on the GA-
1040 printer correctly. The Windows Printing can be set from the TopAccess.
PREPARATION:
Before setting up the Windows Printing, please make sure the following:
• The TCP/IP has been configured to enable the TopAccess.
1
Start the TopAccess and log in to the
Administrator's page.
P28 "STARTING TOPACCESS"
2
Click on the [Network SETUP] menu and click
on the [Other] tab.
• The Other SETUP page is displayed.
3
Enter each item and click on [SETUP].
Enable Windows Printing Service
Check this to enable the SMB printing. Enabling Windows Printing Service makes the print
queue(s) listed on the network. This is checked as a factory default.
Server Name
Enter the name of the GA-1040 printer. This name will appear on the network for accessing
via SMB. The Server Name is set to "e-STUDIO45" as a factory default.
54
Advertisement
Table of Contents
