Dive History Memory [2 History]; Pc Settings Mode [3 Pc Set] - Suunto Gekko User Manual

DIVE
DIVE
Fig. 4.13. Dive History
information. Total number
of dives, dive hours and
maximum depth.
Fig. 4.14. Data Transfer
mode. [3 PC SET].
OPTIONS
Fig. 4.15. Setting Options.
[4 SET].
42
4.1.2. Dive History Memory
[2 HISTORY]
MAX
The Dive History is a summary of all the dives
QUIT
recorded by the dive computer. To enter the Dive
History Memory Mode select MODE- MEMORY-
TIME
HISTORY (Fig. 4.12.).
The following information will be shown on the
display (Fig. 4.13.):
• the maximum depth ever reached
• the total accumulated dive time in hours
• the total number of dives.
The Dive History Memory can hold a maximum
of 999 dives and 999 diving hours. When these
maximum values are reached, the counters will start
again from zero.
SELECT
4.1.3. PC Settings Mode
[3 PC SET]
Although the Gekko does not support PC-download,
the tissue calculations can be reset and all settings
returned to factory defaults using a PC-Interface cable
and special software. This feature is useful for dive
shops and their rental units only. The software is not
available to the general public.
To enter the PC Settings mode select MODE- 1
MEMORY- 3 PC SET (Fig. 4.14.).
NOTE! While in the PC SET mode, the connec-
tor/water contacts are used only for the data transfer.
The Dive Mode IS NOT automatically activated if
the contacts are submerged.
QUIT
Press the SMART (Quit) to exit PC SET mode. If a
button is not pressed or no data is transferred within
5 minutes, the instrument beeps and returns to the
timekeeping display automatically.