3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING
HANDLEBAR LOCK
ON
:At this position, power is connected to
start the engine. The key cannot be
taken out.
OFF
:At this position, power is cut off and the
engine stops. The key can be taken out.
LOCK :At this position, the steering handlebar
is locked. The key can be taken out
Locking Method
Turn the steering handlebar left to the full and then
press to turn the ignition switch key to "LOCK"
position and the handlebar is locked.
Unlocking Method
Turn the key to "OFF" and the lock is released
automatically.
CAUTION:
After locking, turn the handlebar gently to make
sure that it is locked.
Do not turn the ignition switch to "LOCK"
during riding, or the handlebar will be out of
control and cause accidents.
Don't park your motorcycle at a place to hinder
the traffic.
- 5 -