Table of Contents
Advertisement
PRODUCT SPECIFICATIONS
Maximum Hydraulic Cylinder Pressure ...................16 MPa
Force .......................................................................... 4tons
Oil Capacity ................................................................. 3.5 L
Voltage ........................................................... 230 V~50 Hz
In Put Power ............................................................1500 W
No Load Speed .......................................... 2970 ± 10% rpm
Measured sound power level ....................... L
Measured sound pressure level ....................L
Net Weight ..................................................................49 Kg
Log Capacity Diameter, maximum .......................... 250mm
Log Capacity Diameter, minimum ........................... 100mm
Log Capacity Length ............................................... 520mm
Vibration ..................................................................2.5m/s
DESCRIPTION
1. Bleed screw
2. Hydraulic control lever
3. Ram
4. Oil drain bolt with dipstick
5. Side supports
6. Push button box
7. On / Off switch
8. Lift handle
UNPACKING
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
ENGLISH (Original Instructions)
FEATURES
80.8 dB(A)
WA
K
3.0 dB(A)
WA
68.6 dB(A)
PA
K
3.0 dB(A)
PA
2
9. Axle
10.Hitch pin
11.Washer
12.Dip stick
13.Level indicator marks
14.Wood wedge
15.Reset button
16.Work table
17.Wedge
ASSEMBLY
PACKING LIST
1 x Log splitter
1 x Manual
2 x Wheel
KNOW YOUR LOG SPLITTER
Before attempting to use this product, familiarise yourself
with all operating features and safety rules.
BLEED SCREW
Loosen the bleed screw (1) to ensure the smooth flow of air
in and out of the oil tank.
HYDRAULIC CONTROL LEVER
Push down on the hydraulic control lever (2) and the ram(3)
starts pushing the log into the wedge (17).
LIFT HANDLE
The lift handle (8) makes rolling the log splitter from one
location to another simple and easy.
RESET/OVERLOAD BUTTON
If the motor is overloaded the machine will shut off. Remove
the load and push the reset/overload button (15) to restart
the machine.
OIL DRAIN BOLT WITH DIPSTICK
Oil drain bolt with dipstick (4) makes checking and changing
hydraulic oil easy.
SIDE SUPPORTS
Side supports (5) on each side of the work table (16) keep
logs resting securely on the log splitter.
WORK TABLE
Provides surface to support log prior to splitting operation.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
9
2 x Axle
4 x Washer
2 x Hitch pin
( Fig.1)
Hide quick links:
Advertisement
Table of Contents
