Setting Up Vdsl2 Broadband - Technicolor TG589vn V2 User Manual

3

Setting Up VDSL2 Broadband

If you only have an ADSL broadband connection, skip this step.
To receive a VDSL2 broadband service you must have a Central Splitter installed.
If you have signed up for a Telecom VDSL2 broadband plan, a Central Splitter and
VDSL2 connection point will be installed by a technician as a part of your plan.
To set up your VDSL2 broadband connection you must use a Windows or Mac
computer with an ethernet port and a web browser. Due to the length of the
cables supplied, you must set up close to the VDSL2 connection point. Once
broadband is working you can unplug the ethernet cable and use the
modem's wireless (WiFi) network.
VDSL2 connection point
Large connector
Connect the VDSL cable to the DSL port on the modem and the and the VDSL2
connection point.
Note the small connector (RJ11) should go into the DSL port and the large
connector (RJ45) should go into the VDSL2 connection point.
When complete skip to step 5.
4
technicolor
TG589vn v2
This Technicolor TG589vn v2
N10406
VDSL2 Residential Gateway
may be connected to the
Use Technicolor power Telecom Network
supply model DSL36849990 PTC 274 / 12 / 001
w i t h t h i s p r o d u c t .
wireless user codes
CERTIFIED
Network Name (SSID): TELECOM123456
Wireless Key (Password): 1234ABCDEF
Rated Input: 12V 1.5A
1 2 3 4
DSL
MAC : 0 8 7 6 F F 4 E 9 1 A B A C C E S S K E Y : S Z Q 3 M 8 J C GW: DSWWBA643PREB
Small connector
R e s e t
SN: CP1121RAF1G