Auto Restart Function; Turbo Mode - Heat Controller SMA Service Manual

1.8ºF
9.12.4 Auto:
After an hour running under economic mode, the set temp will rise 1.8ºF (1 ,
the set temp will decrease 1.8ºF. If it is in the heating mode, the set temp will increase a similar amount.

9.13 Auto restart function

In case of a sudden power failure, this function automatically sets the unit to previous settings before
the power failure when power returns

9.14 Turbo mode

9.14.1 For 9K and 12K type only
9.14.2 Under cooling mode (except Force Cooling mode), the indoor fan motor will run in High speed
when it receives the signal from remoter controller.
9.14.3 The turbo mode will cancel and indoor fan motor will get back to the preset speed when
one of following conditions occur:
a. mode changed
b. changed to Force Cooling mode;
c. unit is turned off
9.14.4 Sleep mode is not available in this mode.
Service manual
1.8ºF
Heat Controller, Inc. Jackson, MI 49203
- 38 -
℃ ), if it is under cooling mode;