SOYO Pentium SiS 551x User's Manual & Technical Reference page 33

PnP BIOS Auto Config
1st Available IRQ*
2nd Available IRQ*
3rd Available IRQ*
4th Available IRQ*
PCI IRQ Activated B
PCI IDE 2nd Channel
PCI IDE IRQ Map To
Primary IDE INT#
Secondary IDE INT#
Internal PCI/IDE
IDE Primary Master
IDE Primary Slave PIO
IDE Secondary Master
IDE Secondary Slave
IDE HDD Block Mode
*: These items will disappear when PnP BIOS Auto Config. is enabled.
2. Use the arrow keys to move between items and select values, Modify selected
fields using the PgUp/PgDn/+/- keys.
A short description of screen items follows:
PnP BIOS Auto Config.
1st (2nd) (3rd)
(4th)
Available IRQ
PCI IRQ Activated By
PCI IDE 2nd Channel
ROM PCI/ISA BIOS
PCI & ONBOARD 1/0 SETUP
AWARD SOFTWARE,
: Disabled Onboard
, 9*
Onboard Serial Port 1
: 10* Onboard Serial Port 2
: 11*
Onboard
: 12* Parallel
ECP Mode Use DMA
Serial Portl
: Level
Y
Serial
: Enabled
: PCI-AUTO
:A
:B
Both
PIO : Auto
ESC : Quit
: Auto
F1
PIO : Auto
F5
: Auto
PIO F6
F7 '7 : Load Setup Defaults
: Enabled
Disabled: BIOS doesn't ' manage ISA PnP card (i.e.
IRQ) but PCI card.
Enabled: BIOS auto manage PCI and ISA PnP
card,
If slot 1-4 is set to AUTO in the item above, then the
BIOS automatically routes the INT# to the specified
IRQ following the 1st (2nd) (3rd) (4th) IRQ order –
you assign.
Choose Edge or Level. Most PCI trigger signals are
Level. This setting must match the PCI card.
Choose Enabled (default) or Disabled. When
Enabled is set, IRQ15 is dedicated for secondary IDE
use. When Disabled is set, IRQ15 is released for
other devices.
, '
INC.
FDC Controller : Enabled
: COM1/3F8
: COM2/2F8
Parallel Port : 378H/IRQ7
Port Mode : ECP/EPP
:3
MIDI : Disabled
Port2 MIDI : D i s a b l e d
: Help Pu/PD/+/- : Modify
: Old Values (Shift)P2 : C o l o r
: Load BIOS Defaults
. .
,