9
Adjusting the stitch length
.06
Fig. 9 - 09
9
Entering start and end backtacks
.07
Switch on the machine.
If necessary switch off the "darning seam" or "counted seam" function.
Select the values for the number of stitches by pressing the corresponding +/- keys:
A = number of forward stitches for the start backtacks
B = number of reverse stitches for the start backtacks
C = number of reverse stitches for the end backtacks
D = number of forward stitches for the end backtacks
Switch on the corresponding functions by pressing the start backtacks and /or end
backtacks key (arrow appears opposite the corresponding function key).
1
5
5
5 5
A
B
C
D
Set the desired stitch length with
adjustment wheel 1.
(only on machines with Quick motor)
Setting up
9 - 6