First Time Installation; Program Table - Polaroid 37" User Manual

6.3.2-Manual tuning of channels and
storing in the memory
Press MENU button in digital mode
and MAIN MENU will be displayed.
Select SETUP tab with Down
movement button and confirm with
the OK button. SETUP menu will
be displayed. Select MANUAL
TUNING tab and confirm by
pressing the OK button. Manual Search
Parameters menu will be displayed.
Highlight the Channel tab by means of
Manual Search Parameters
Channel
Frequency
Update of Channel List
Change
Up/Down buttons and directly
enter the frequency number of the
channel you want to search, if you
know, by using the numeric keys
on the remote control. If you don't
know the frequency number, you
can scan frequencies by using the
Left/Right movement buttons.
After entering the frequency you
want to search, highlight Update
of Channel List tab with Up/
Down movement buttons and select either
one of Add channels, Replace channels
or Erase channel list items, then press
OK button to start searching. Channels will
be searched or changed according to the
search method you have chosen.
Channel Search
Waiting for signal...
Service found:
TV: 0 Radio:
21
474000
Add channels
Back
Start
0 Other: 0
Stop Search
Add Channels : With this option, the new
channels in the frequency which is desired to
be manually searched will be scanned and
added to the existing channel list.
Replace Channels : With this option, you
can update the existing channel list with the
modifications made by the broadcasting
enterprise.
Erase Channel List : With this option,
you can delete all channels in the existing
channel list to store only the new channels in
the desired frequency into the memory.
Note: You can also access Manuel Tuning
menu from the System Menu submenu
under Digital Features menu.

6.3.3-First Time Installation

If you select this function, all channel
information in the memory will be deleted.
The OSD where country selection shall be
made is displayed and channel search is
made automatically. First, digital channels
are searched. You can start Analog channel
search by pressing the OK button after the
digital channel search is completed.

6.3.4-Program Table

With the program table, you can see the
stored channels in a list, switch between
TV channels and Radio channels or create
your favorite channels list for 6 TV and Radio
channels according to your preference.
Select the PROGRAM TABLE item
from the main menu by means of
Up/Down movement buttons to
access program table and press
OK button to confirm. Program
Table will be displayed. You can
also access the program table menu directly
by pressing the OK button on your remote
control when there is not any open menu on
the screen.
I 11
EN