Cleaning - Philips Norelco CoolSkin 6716X Manual

6711X_6701X DFU.rQXD
Downloaded from www.Manualslib.com
11/5/03

Cleaning

Important
◗ Always turn Razor OFF, unplug from outlet and
remove cord from razor before cleaning.
◗ Always store Razor with Protective Razor Head
Cap on shaving heads.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
After each use: Razor
1
C
2
C
3
BUT BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
C
4
5
manuals search engine
6:09 PM
Switch razor off.
Press the Razor Head Release Button
located under razor heads on front side of
Razor.
Flip open the Razor Head Assembly and
clean the razor heads and hair chamber by
running under hot water.Water from the
tap should be on a hot setting,
Rinse the outside of the shaving unit.
Shake off excess water and close Razor
Head Assembly.
Page 15 (Black plate)
ENGLISH
15