Quick Start - Vox JamVOX Installation & Setup Manual

In this section we'll explain the basics of using JamVOX by taking you through the
actual steps of operation.
Step1 Listen to the sound of the guitar programs
Guitar program
name
Effect routing
Amp/Cabinet
control panel
Effect Ctontrol
panel
1
Click the Program Select buttons (q/u) located at the right of the Guitar pro-
gram name.
Clicking these buttons will move up or down through the programs one by
one. Play your guitar to try out each program.
HINT You can also use other ways to select programs. In the Help menu, click
"Owner's Manual..." to view the JamVOX Owner's manual, and refer to the
section "Selecting programs."
2
Click the Amp/Cabinet name displayed above the
Effect routing section.
In the Amp/Cabinet catalog that appears, you can
change the amp/cabinet.
HINT You can also change the effect units in the same way.
3
Try dragging and dropping an effect device to the
location where you want to connect it.
You are free to change the connected order of all of the effect units.
HINT The amp/cabinet and effect units can be adjusted in their corresponding con-
trol panel. The Effect control panel is shown for the effect device you select by
clicking.

Quick Start

Program Select buttons
11