Power Supply - Baumatic BWM50 Instruction Manual

o The drain hose should not be positioned any higher than 90 cm
as this will cause drainage problems.
o You can place the end of the drain hose in your drain pipe. Push
it a short way down into your drain pipe.
o IMPORTANT: Do not insert the drain hose too deeply into the
water pipe, as this may cause siphoning.
o Alternatively, you can place the end of the drain hose into a sink.
You can secure the hose to the tap to hold it in position.
o ALWAYS use an elbow to bend the drain hose at a proper
bending angle. Fix it well when using the elbow.
o NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL
LENGTH.
o You should ensure that the drain hose is not kinked or
knotted before using the machine.

Power supply

o Consult the
connections. Ensure that the voltage reaching the plug, is the
same as that on the rating plate.
o DO NOT
INFORMATION ON IT IS IMPORTANT.
rating plate
REMOVE THE
o IMPORTANT: The
electrical socket
must
accessible
the appliance is
installed.
BEFORE making
RATING PLATE
still be
once
the electrical
AS THE
29