h t t p : / / j d w x z l w . 5 d 6 d . c o m / ? f r o m u s e r =SNvÛ ~ ô O î
4. Main panel with Bottom Tray
-Remove 9 screws for disconnect the Bottom tray as Fig. 5.
-Pull the bottom tray
on press right and left side clip
fig. 7.
Remove all screws between main board and bottom tray, then
transfer to service position.
5. SERVICE POSITION
Reconnect connectors, some wires and panels (chassis),
service position can be available for DC/AC measurement
as shown in Fig. 8.
[ ¶ u 5~ ô O î • D e ™ • Q ÿ Q M • 9 N • } T y Í ~ ô O î • D e ™
Mechanical Instructions
from fig. 6 &
Screw
Fig. 5
Press CLIP
Fig. 6
V40 107P5
9
Press clip then Pull-up
Fig. 7
Video panel
Main panel
Fig. 8 SERVICE POSITION
9
Go to cover page