Related Manuals for Philips 222E2
Summary of Contents for Philips 222E2
- Page 1 EN User manual Customer care and warranty Troubleshooting & FAQs 222EL2 222E2...
-
Page 2: Table Of Contents
Remove Base Stand and Base ... 7 Product information SmartImage Lite ... 9 SmartContrast ... 10 Philips SmartControl Lite ... 11 Philips' Flat Panel Monitors Pixel Defect Policy ... 18 Technical Specifications Resolution & Preset Modes... 23 Automatic PowerSaving ... 23 Regulatory Information ... -
Page 3: Important
DC power cord for normal operation. • Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) •... -
Page 4: Notational Descriptions
• IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging”... -
Page 5: Disposal Of Product And Packing Material
1.3 Disposal of product and packing material Waste Electrical and Electronic Equipment- WEEE This marking on the product or on its packaging illustrates that, under European Directive 2002/96/ EC governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. -
Page 6: Setting Up The Monitor
222E2/222EL2 Quick start guide Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. EDFU CD... -
Page 7: Operating The Monitor
Connecting to your PC Kensington anti-thief lock AC power input DVI-D input (available for selecting model) VGA input Connect to PC Connect the power cord to the back of the montior firmly. Turn off your computer and unplug its power cable. Connect the monitor signal cable to the video connector on the back of your computer. -
Page 8: The Osd Menu
Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. -
Page 9: Remove Base Stand And Base
Resolution notification This monitor is designed for optimal performance at its native resolution, 1920x1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920x1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. -
Page 10: Remove Base
Remove the Base Condition: • For VESA standard mounting applications 1. Remove the 4 screw covers. 2. Remove the 4 screws and then remove the base from the monitor. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. 100mm 100mm... -
Page 11: Product Information
Whether you're working with text applications, displaying images or watching a video, Philips SmartImage Lite delivers great optimized monitor performance. Why do I need it? You want a monitor that delivers optimized display... -
Page 12: Smartcontrast
There are 3 modes to be selected: Standard, Internet, and Game. • Standard: Enhances text and dampens brightness to increase readability and reduce eye strain. This mode significantly enhances readability and productivity when you're working with spreadsheets, PDF files, scanned articles or other general office applications. -
Page 13: Philips Smartcontrol Lite
3.3 Philips SmartControl Lite The new SmartControl Lite software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through... - Page 14 Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. • You can follow the instruction and do the adjustment. • Cancel prompts user if you want to cancel installation.
- Page 15 Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input.
- Page 16 First color Calibration Screen: • Previous button is disabled until the second color screen. • Next goes to the succeeding target (6-targets). • Final next goes File>Presets pane. • Cancel closes the UI and returns to the plug in page. SmartImage Lite Allows user to change setting for better display setting based on content.
- Page 17 Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available. • Display the Source instruction pane and current input source setting.
- Page 18 Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
- Page 19 Task Tray Menu Enabled The task tray menu can be displayed by right- clicking on the SmartControl Lite icon from the task tray. Left Click will launch the application. The task tray has five entries: • Help - Access to User Manual file: Open User Manual file using the default browser window.
-
Page 20: Philips' Flat Panel Monitors Pixel Defect
TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. - Page 21 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 22: Technical Specifications
Convenience User Convenience OSD Languages Other convenience Plug & Play Compatibility Stand Tilt TFT-LCD CCFL (222E2), LED (222EL2) 21.5'' W (54.6 cm) 16:9 0.248 x 0.248 mm 250 cd/m² 500,000:1 (222E2); 20,000,000:1 (222EL2) 1000:1 5 ms 1920 x 1080 @ 60Hz 176°... - Page 23 On mode: White, Standby/Sleep mode: White (blinking) Build-in, 100-240VAC, 50/60Hz 528.8 x 406 x 195mm 528.8 x 336.3 x 49mm 570 x 465 x 155mm 4.25kg (222E2), 3.4kg (222EL2) 3.95kg (222E2), 3.1kg (222EL2) 5.25kg (222E2), 4.4kg (222EL2) AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -3Hz 25.81W...
- Page 24 Color Finish Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. Storage: -20°C to 60°C operation: 0°C to 40 °C 20% to 80% Non-operation: + 40,000 ft ( 12,192 m)
-
Page 25: Resolution & Preset Modes
59.90 59.89 Note This data is subject to change without notice. 60.00 59.88 59.95 59.93 59.95 60.00 H-sync V-sync Power Used 222E2< 40W (typ.) 222EL2< 19.7W (typ.) < 0.5 W (typ.) < 0.5 W (typ.) LED color White White (Blinking) -
Page 26: Regulatory Information
Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. TCO Displays 5.0 Information Congratulations,... - Page 27 Note We recommend you switch off the monitor when it is not in use for a long time. Power Consumption White 222E2< 26 W (typ.) 222EL2< 17 W (typ.) White < 0.5 W (typ.) < 0.5 W (typ.) Blinking...
- Page 28 Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 29 Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
- Page 30 Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three- prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a...
- Page 31 Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤...
-
Page 32: Customer Care And Warranty
Philips F1rst Choice Warranty. This two-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective. Philips aims at a swap within 48 hours of your call being received. What is covered? - Page 33 The Philips F1rst Choice Warranty may not apply • The documents have been altered in any way or made illegible;...
- Page 34 F1rst Choice Contact Information Country Code Austria Belgium Denmark Finland +358 Luxembourg +352 The Netherlands Norway Poland Portugal +351 Spain Sweden Switzerland United Kingdom Telephone number Tariff €0.07 0810 000206 €0.06 078 250851 3525 8761 Local call tariff €0.08 840 320 041 26 84 30 00 Local call tariff €0.10...
- Page 35 Information Centers In case your Philips product is not working correctly or is defective, please contact your Philips dealer or directly the Philips Service and Consumer Information Centers...
- Page 36 Consumer Information Centers Argentina / Australia / Brasil / Canada / New Zealand / Belarus / Bulgaria / Croatia / Czech Republic / Estonia / United Arab Emirates / Hong Kong / Hungary / India / Indonesia / Israel / Latvia / Lithuania / Malaysia / Middle East + North Africa / New Zealand / Pakistan / Romania / Russia / Serbia &...
- Page 37 123290 Moscow Russia Tel. +7(495)797 3434 Profservice: 14A -3, 2Karacharovskaya str, 109202, Moscow , Russia Tel. +7(095)170-5401 TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com LLC Topaz Company...
- Page 38 Fax: 021-7510982 E-mail: gepta@cbn.net.id Service hours: Mon.~Fri. 8:30am~4:30pm; Sat. 8:30am~2:00pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakarta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakarta Pusat. Phone: 021-3455150, 34835453 3.
- Page 39 Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: consumer.care.sg@philips.com Service hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm Taiwan Company: FETEC.CO Address: 3F, No.6, Lane 205, Sec.
- Page 40 Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This two-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase.
- Page 41 Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit.
- Page 42 Please contact Philips at: (800) 479-6696 Two years free parts and two years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties.
- Page 43 In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.
-
Page 44: Troubleshooting & Faqs
7 Troubleshooting & FAQs 7.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Common Problems No Picture (Power LED not lit) •... - Page 45 The "power on" light is too strong and is disturbing • You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.
-
Page 46: Smartcontrol Lite Faqs
Lite and re-install it once more. Q5. I forgot my PIN for Theft Deterrence Function. How can I do? Ans.: Philips Service center has a right to ask for legitimate identification and authorization, in order to establish ownership of the monitor. -
Page 47: General Faqs
Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920x1080@60Hz (21.5"). • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. • Turn on your monitor and then turn on your PC. - Page 48 Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K. Q9: Can the Philips LCD Monitor be mounted on the wall? Ans.: Yes. Philips LCD monitors have this optional feature.
- Page 49 Q13: What is Image Sticking, or Image Burn- in, or After Image, or Ghost Image in LCD panels? Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn- in", "after-imaging", or "ghost imaging"...
- Page 50 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.