MSI IM-945GC User Manual page 51

Recall VGA BIOS from S3
Selecting [Enabled] will make BIOS call VGA BIOS to initialize the VGA card when
system wakes up (resume) from S3 state. The system resume time is shortened if
you disable the function, but system will need AGP driver to initialize the card.
Therefore, if the AGP driver of the VGA card does not support the initialization
feature, the display may work abnormally or not function after resuming from S3.
Suspend Time Out (M inute)
After the selected period of system inactivity, the system automatically enters Sus-
pend mode.
Power Button Function
This feature sets the function of the power button. Settings are:
[Power On/Off] The power button functions as normal power on/off button.
[Suspend]
Restore on AC Power Loss
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Settings are:
[Off]
[On]
[Last State]
is saved to main memory that remains powered while most
other hardware components turn off to save energy. The
information stored in memory will be used to restore the sys-
tem when a "wake up" event occurs.
W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Always leaves the computer in the power off state.
Always leaves the computer in the power on state.
Restores the system to the status before power failure
or interrupt occurred.
BIOS Setup
3-17