Battery/Auger Replacement; Cleaning And Maintenance; Warranty - Waring WW0120 User Manual

from the bottle. Press and hold the upper part of the switch
(indicated by an up arrow) to release a cork from the mechanism
after you have removed the cork from the bottle (see fig 2).
1. Place the electric wine bottle opener on
top of the wine bottle, making sure that it
remains as straight/upright as possible
at all times. If you hold the electric wine
opener at an angle to the bottle, it will not
remove the cork properly (see fig. 3).
2. Hold the wine opener firmly and depress
the lower part of the switch. The auger
spiral will turn in a counterclockwise
direction and enter the cork, then gradually
remove it from the bottle. When the electric
wine bottle opener mechanism has
stopped, the cork has been fully removed
from the bottle.
3. Lift the wine opener up and away from the
bottle. To remove the cork, depress the
upper part of the switch. The spiral will
turn in a clockwise direction and release
the cork (see fig 4).
4. Always return the wine opener to the
charging base when done. This will
protect the unit while not in use.
bATTERY REPlAcEMENT
If charging instructions are followed, your battery should last the
lifetime of the electric wine bottle opener. In the event that your
battery requires replacement, turn the battery compartment cover
to the unlock position following "lock/unlock" directions, remove
old battery, and push in the new battery. When the new battery is
pushed down, replace the cover and twist to the lock position.
WARNING: Your electric wine bottle opener is equipped with a
removable battery. Do not remove this battery unless there is a
power problem with the product and the battery is not charging
correctly. Never put the battery in or near an open flame, fire,
(fig 3)
(fig 4)
6
oven or heating appliance. Never put the battery in liquid. Never
disassemble the battery. Keep the battery away from children.
AUGER REPlAcEMENT
Your electric wine bottle opener is packed with a replacement
auger. To replace the old auger with a new auger, reference the
insert included in package.

clEANING AND MAINTENANcE

Always unplug the appliance from the main outlet before cleaning.
Make sure all the parts are clean and dry before storing. To clean
housing, wipe with a clean, damp cloth. Never immerse power
adapter, charging base, battery or housing in water or any other
liquids. Never submerge the motor base in water or other liquids,
or place in dishwasher. Any other servicing should be performed
by an authorized service representative.

WARRANTY

Waring warrants every new COMMERCIAL PRODUCT to be
free from defects in material and workmanship for a period of
one year from the date of purchase when used with foodstuffs,
nonabrasive liquids (other than detergents) and nonabrasive
semi-liquids, providing it has not been subject to loads in excess
of the indicated rating.
Under this warranty, Waring will repair or replace any part, which,
upon our examination, is defective in materials or workmanship,
provided the product is delivered prepaid to the Waring Service
Center at 314 Ella T. Grasso Ave. Torrington, CT 06790, or any
Factory Approved Service Center.
This warranty does not: a) apply to any product that has become
worn, defective, damaged or broken due to use or due to repairs
or servicing by other than the Waring Service Center or a Factory
Approved Service Center, or due to abuse, misuse, overloading or
tampering; b) cover consequential damages of any kind.
The one year warranty is applicable only to appliances used in
the United States and Canada. This supersedes all other
express product warranty or guaranty statements. For Waring
products sold outside of the U.S. and Canada, the warranty is the
responsibility of the local importer or distributor. This warranty
may vary according to local regulations.