The statistics menu
Mode: 2 STAT (fx-82AU PLUS II) 3 STAT (fx-100AU PLUS)
After you have selected the mode for statistics the following screen will be displayed.
Menu 1 is for 1 variable statistics. The remaining menus are for regression. When you press 1 for 1
variable statistics one of two screens will appear, depending on whether a frequency column was 'on' or
'off' the last time the calculator was used in the statistics menu.
Frequency ON
Frequency OFF
When the frequency is 'on' you can enter scores and their frequencies. With frequencies 'OFF' scores
are entered one after the other in the STAT column.
Turning frequency on or off
In the STAT menu press qw for setup and the following options will be displayed:
The little black arrow head above 2: LineIO indicates that there are more options below. Press R to
bring up the more options.
The options for statistics are in 3. Press 3 to view the statistics options. The screen shot for this step
is on the next page.
© Sue Thomson and Shriro
This page may be photocopied for non-commercial use.
Page 11