Fail Over - Edimax 3G-6408n User Manual

w
When you f
requires about 60 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.

3-5-5 Fail Over

WAN failure detection works by detecting the presence of traffic on the 3G modem link.
If the link is idle for too long, the router will attempt to ping a target IP address. If the ping
does not reply, the router assumes the link is down and attempts to fail over to the
Ethernet WAN link.
anges you made and restart the broadband router, this
84