Table of Contents
Advertisement
Parameter
Dynamic IP
Static IP address
PPPoE
PPTP
L2TP
Telstra Big Pond
DNS
DDNS
Once you have made a selection, click <More Configuration> at the bottom of the screen and proceed to the manual's
relevant sub-section
2.2.1 Dynamic IP
Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some ISP's may also require that
you fill in additional information such as Host Name, Domain Name and MAC address (see chapter 1 "Cable Modem" for
more detail)
2.2.2 Static IP Address
Select Static IP address if your ISP has given you a specific IP address for you to use. Your ISP should provide all the
information required in this section. (See chapter 1 "Fixed IP" for more detail)
2.2.3 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the
information required in this section. (See chapter 1 "PPPoE" for more detail)
2.2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP should provide all the
information required in this section. (See chapter 1 "PPTP" for more detail)
2.2.5 L2TP
Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP should provide all the
information required in this section.
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already
Your ISP requires PPPoE connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.
Your ISP requires L2TP connection.
Your ISP requires Telstra Big Pond connection.
You can specify a DNS server that you wish to use
You can specify a DDNS server that you wish to use and configure the user name and
password provided by you DDNS service provider.
Description
22
Advertisement
Table of Contents
