Siemens M35i Quick Start Manual page 2

SIM Card / Battery
Insert SIM card
r
Your service provider will supply a SIM
card, containing all the key data about
your line.
You may need to snap this out careful-
ly from a credit card sized SIM
s
• Use a coin to unscrew the cover (1)
t
• Lift off the battery cover (2)
o
• Slide the SIM carrier into the phone
n until it clicks into place (7).
• Insert the battery into the phone and
close the cover.
Charge battery
The new NiMH battery is not yet fully
• Slide out the SIM carrier (3), then charged:
turn it in the direction indicated by
• Insert the charger plug into the sock-
the arrow (4).
et on the phone (with arrow on plug
facing upwards).
• Plug charging unit into a mains pow-
q
er socket (ensure voltage range stat-
ed on charger is not exceeded).
The unit is fully charged after 2 hours.
The charging unit will heat up when
used for longer periods.
p
if you experience a reduction in usage
time, carry out the battery care func-
tion (p.52).
,
Display shows charge level.
• Slide the SIM card into the carrier Usage time
(5). Ensure the angled corner is posi-
A fully charged battery: 50 - 180 hours
tioned correctly and that contact is
standby time or 90 - 300 minutes
made.
talk time.
* \
• Turn the SIM carrier until the SIM
Batt. empty: -
card faces the phone (6).
A beep sounds when the battery is
nearly empty.
    
C
- full
Display Indicators
Reception strength/
battery level.
Fast Access Key
Can be assigned an im-
portant phone number/
function.
Call Key
- Dial the displayed
phone number or
name.
- Accept calls.
- Display last calls in
    
standby mode.
Phonebook
Display phonebook en-
tries for easy calling.
Ringer On/Off
Hold down: Switch
ringer on and off.
2ZQ1XPEHUV!
1HZ(QWU\!
%UHQGD
GT
 >>
Overview
Menu
Set the network and
phone functions.
V   \
6HUYLFH3URYLGHU
Soft Keys
 
(see below)
 $ 0 (  >  ( 1 8 >
On/Off/End
Press briefly:
End call or jump back to
the previous menu level.
Hold down:
Activate/deactivate
phone or return to stand-
by mode.
Key Lock
Hold down:
Activate and deactivate
the key lock.
Soft Keys
The current functions are shown on the
display as symbols or text above the
keys. Different functions are available by
pressing either the left or the right end of

the keys.
 3 7,21 6>
In standby, the soft keys enable fast
"name" dialling and menu access or ac-
R
cess to a special service, such as
SIM service.