Table of Contents
Advertisement
These three responses tell you that the POST has
successfully completed. Other information will
appear on the screen and it is not important at
this time. If you have a diskette drive and/or a
printer (that you turned on), you will also hear
and see responses from these; ignore these
responses at this time.
Remember an error message will appear on your
screen if the system unit is turned on before the
expansion unit, if you have an expansion unit
installed. To recover, turn off the power to all
devices then set the Power switch on the
expansion unit to On, then turn on the system
unit's power.
If the responses were not correct, or if your
screen is not similar to the figure below, refer to
"Problem Determination Procedures."
The IBM Personal Computer Basic
Version CX.XX Copyright IBM Corp XXXX
XXXXX Bytes free
OK
1LIST 2RUN 3LOAD" 4SAVE 5CONT 6LPTI '7TRON 8TROFF 9KEV OSCREEN
Getting Ready 3-7
Advertisement
Table of Contents
