Schematic Diagram - Main Board (2/4) - Sony MZ-E60 Service Manual

6-3-3. SCHEMATIC DIAGRAM — MAIN BOARD (2/4) — • Refer to page 34 for IC Block Diagrams.
(Page
26)
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
1 / W or less unless otherwise
4
specified.
• % : indicates tolerance.
• C : panel designation.
• A : B+ Line.
• Power voltage is dc 1.5V and fed with regulated dc power
supply from battery terminal.
• Voltage is dc with respect to ground under no-signal
condition.
no mark : PB
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Signal path.
F
: PB
(OPEN/CLOSE)
(Page 31)
– 27 – – 28 –
MZ-E60