Front View; Rear View; Power Connector; Operating Instructions - Gateway FPD1520 Service Manual

FRONT VIEW

OSD
OSD Button
1. Power ON/OFF Button
Use this button to turn the monitor on or off.
2. Power Indicator
This indicator lights up green when the monitor
operates normally; in DPMS (Energy Saving) mode,
- stand-by, suspend, or power off mode - its color
changes to amber.
3. Button
Use these buttons to choose or adjust items in the on screen
display.

OPERATING INSTRUCTIONS

AUTO/SET
Power Indicator
Power Button
AUTO/SET Button
Buttons

Front Control Panel

OSD
5
3

REAR VIEW

POWER
CONNECTOR
AUTO/SET
4
4. AUTO/SET Button
Use this button to enter a selection in the on screen display.
P R O C E S S I N G
A U T O C O N F I G U R A T I O N
Note: Some signal from some graphics boards may not function
properly. If the results are unsatisfactory, adjust your monitor's
Position, Clock and Phase manually.
5. OSD Button
Use this button to enter or exit the on screen display.
D-Sub Signal
Connector
1 2
* AUTO adjustment function
Touch the AUTO/SET button before
using OSD menu. This button is for the
automatic adjustment of the screen
position, clock and phase.