Audio Mode Selection (Stereo/Sap/Mono) - Panasonic Color Television Operating Instructions Manual

Audio Mode Selection
ACTION
ca
Displays and Exits Menus
Stereo/Sap/Mono
When Audio is broadcast in Stereo or SAP an ON
Screen display will appear on initial ''Turn On" and
"Channel Change". The available choices will be
indicated in red.
1. Press the ACTION button to display the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
select the Audio Icon.
3. Press the ACTION button to display the Audio
Adjustment Menu.
Located On Remote Control
Selects Desired
Feature When
Menu is Displayed
Selects or Adjusts
Features When
Menu is Displayed
I
~~
I'AUDIOI
AUDIO NORM
BASS
TREBLE
BALANCE
MODE
SPEAKER
AI SOUND
NO
1111111111111- - - - - - -
1111111111111- - - - - --
------ 1-------
STEREO SAP MONO
ON
ON
4. Press the CH UP or DOWN button to select
"MODE".
5. Press the VOL LEFT or RIGHT button to select:
• STEREO - Two channel Audio reception.
• SAP - Second Audio Programming (Typically used
for bilingual audio).
• MONO - Use when stereo signal is weak.
NOTE: The selected mode will be underlined.
6. Press the ACTION button twice to exit the Audio
Adjustment Menu.
-26-