8.
Move the heater into position. Connect the bent joint to the exhaust outlet mouth (upper opening) and
attach the L-shaped hose to the intake inlet mouth. Make sure all connections are tight (See Fig. 12).
9.
Secure the L-shaped hose to the intake inlet mouth with the hose band. Secure the bent joint to the flue
pipe with the pipe holder (If the extension pipe is used, also attach the pipe holder to the connection of
the bent joint and the extension pipe). Secure the bent joint (or the extension pipe) to the exhaust outlet
mouth by sliding the pipe stopper in the exhaust mouth bracket (See Fig. 13).
28
Fig. 12
Fig. 13