Advertisement
MDC-COM is a PC program designed to communicate with MDS636 units. It sends
commands and receives replies through the serial port. An RS-232 to RS-485
converter is required to connect the PC comport, modem, or the LAN adapter to the
and MDS636 units (refer to the wiring diagram on page 6.)
RS 232 to
RS 485
Computer
converter
To install MDS-COM onto a hard drive insert the distribution diskette into drive A.
1. Click on: Start → run
2. Type: A:\setup.exe Then click [OK] or
Click the [Browse] button; navigate to drive A and click setup.exe
3. Follow the instructions
Installation will automatically create a MDS-COM file in your computer's Program
Files folder.
Upon completion of the installation, the program icon will be displayed in a window.
To place the icon of your desktop, right click on the icon and drag it to your desktop
screen.
To run the MDS-COM software click on the desktop icon – or
Click on: Start → Programs → MDS636-COM → MDS636-COM
Should you elect to uninstall the MDS-COM software:
1. Click on: Start → Settings → Control Panel → Add/Remove Programs
2. Select: MDS636-COM then click on the Add/Remove button
MDS-COM Software
MDS636
MDS636
Unit 1
Unit 2
Installation
8
Up to 4000 feet
MDS636
MDS636
.......
Unit 3
Unit 63
MDS636
Unit 64
Advertisement
