Table of Contents
Advertisement
Chapter 5 - Installing the CAB 4n
Some t ext t o force a page break in W ord but rem ain invis ible
Configuration 2
Instead of using a switch, you can connect the CAB CobraNet port directly to the CobraNet
port on your NION. However, this type of direct connection requires a crossover cable. For
more information, we recommend that you search the internet.
Note: With this direct connection method, you cannot connect more than one CAB product to
NION CobraNet card. This type of connection is normally used for testing and troubleshooting
and has limited advantages in actual system installations.
Audio connections
Each audio connection on the CAB and NION products is a single, three-wire, balanced
analog circuit. The connections are identical for both microphone, line input and line output
connections. We recommend that audio connections are made with high quality shielded wire.
Notes:
As with any electronic connection, care should be taken to ensure that the termination is
solid. There should be no stray wire strands, kinks or nicks in the wire jacket for a proper
termination.
Stranded wires should not be soldered. Solder will cold flow under the pressure of the
screw terminal, causing a loose connection to develop over time.
22
Version 1.6.4b.1
June 11, 2012
Advertisement
Table of Contents
