Front Panel - MediaMatrix CAB 4n Hardware Manual

Some t ext t o force a page break in W ord but rem ain invis ible

Front Panel

1. HARDWARE ID SWITCHES 4-position rotary switches for setting the hardware ID.
Located behind removable front panel for tamperproof settings.
2. FAULT LED Illumination of the Fault LED indicates an unexpected condition within the
CobraNet interface. Some fault conditions will also light the RX Error and/or TX Error
LEDs; this is to give more specific indication if the unexpected condition is in the receive
or transmit processes. The errors are reported by a series of flashes.
3. CONDUCT LED Indicates the CAB 4n is an active Conductor on the CobraNet network.
Only one Conductor is allowed per network.
4. LINK LED Indicates the physical layer connection has been established between the
CAB 4n and the network switch. This function is duplicated in the software control panel
(available via the
5. RX LED Indicates the presence of data being received into the CAB 4n from the
CobraNet network.
6. TX LED Indicates the presence of data being transmitted from the CAB 4n onto the
CobraNet network.
7. HARDWARE ID INDICATORS or AUDIO METERS. These LEDs have a dual
purpose.
a) Before a valid CobraNet control connection has taken place, these indicate the
hardware ID. They are used in conjunction with the hardware ID switches (see item #1
above) to set the Hardware ID, which allows NWare and the NIONs to communicate
with, and control, the CAB 4n.
b) Once the CAB 4n is being controlled by the NION software, these become peak
reading LED ladder displays, indicating audio input/output levels. For inputs, the
signal level is displayed after the A/D converters. For outputs, the signal level is
displayed before the D/A converters.
8. POWER LED Indicates that the CAB 4n is powered from an AC mains power source.
June 11, 2012
block in NWare).
Version 1.6.4b.1
CAB 4n Hardware Manual
17