Stereo Indicator - Pioneer VSX-29TX Service Manual

VSX-29TX, VSX-27TX, VSX-26TX,
VSX-24TX, VSX-D908S
Display (VSX-29TX)
All the display information is explained and /or referenced here.
1
SIGNAL
SELECT OVER
ANALOG SP
DIGITAL
AC-3RF MONO STEREO
AUTO
AC-3DTS
L
LS LS RS
1 SIGNAL SELECT indicators
Light to indicate the type of input signal selected for the
current component (see "Front Panel", %, SIGNAL
SELECT).
ANALOG : Lights when analog signals are assigned.
DIGITAL : Lights when digital audio signals are selected.
(DVD/LD, CD, MD/TAPE 1, TV/SAT, VCR 1, VCR 2)
AC-3 RF : Lights when AC-3 RF signals are assigned.
(DVD/LD, TV/SAT, VCR 1, VCR 2)
AUTO : Lights when the receiver is set to select the input
signal automatically. (DVD/LD, CD, MD/TAPE 1, TV/SAT,
VCR 1, VCR 2)
AC-3 : Lights when a source with Dolby Digital signals is
played.
DTS : Lights when a source with DTS audio signals is
played.
2 Speaker indicators
Light to indicate the current speaker system (see
"Front Panel", £, SPEAKERS (A/B)).
SP # A : Lights when speaker system A is selected.
SP # B : Lights when speaker system B is selected.
SP # AB : Lights when speaker systems A & B are
selected.
3 Analog level indicators
OVER : If "ANALOG" is selected in SIGNAL SELECT,
this indicator lights to show that an excessively strong
signal is being processed. When this occurs, press
INPUT ATT on the front panel to attenuate (lower) the
signal. Also, when "DIGITAL" is selected in SIGNAL
SELECT, this indicator lights to show that a source
containing an excessive amount of information is being
processed.
ATT : Lights when INPUT ATT is used to reduce the level
of the input signal (available in ANALOG mode only).
4 LOUDNESS indicator
Lights when the LOUDNESS mode is on.
5 H.P (headphones)
Lights when headphones are connected to the PHONES
jack (speakers A and B turn off automatically).
6 MIDNIGHT indicator
Lights when the MIDNIGHT LISTENING mode is on.
7 DSP indicator
Light when a DSP or Advanced Theater mode is
selected.

8 STEREO indicator

Lights when a STEREO mode is selected.
9 Radio Frequency/Function indicator
106
2 3 4 5 6 7 8
ATT LOUDNESS MIDNIGHT
H.P
AB
TUNED AMFM
C R LFE
# @ !
9 0
DSP STEREO
PRO LOGIC
DIGITAL
~
Displays the function or the frequency of the current radio
station.
0
Surround/dts mode indicators
DIGITAL : When the
receiver is on, this indicator lights to indicate playback of
a Dolby Digital signal. However,
during 2 channel playback of Dolby Digital.
PRO LOGIC : When the
receiver is on, this indicator lights during 2 channel
playback. ( Both B or A+B speaker systems turn off
automatically when headphones are plugged.)
DTS : Lights when DTS signals are input.
HOME THX CINEMA : Lights when the HOME THX
CINEMA mode is selected.
- MASTER VOLUME indication
Displays current level of master volume.
= TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
~ Character display
Displays sound modes, general information, etc.
! Tuner indicators
MONO : Lights when the tuner is set to receive FM
broadcasts and when selected MPX mode.
STEREO : Lights when a FM stereo broadcast is
received in the auto stereo mode.
TUNED : Lights when a broadcast is received.
AM/FM : Light to indicate the current band (FM or AM).
@ LFE indicator
LFE (Low Frequency Effects) indicator lights to indicate
that the program source contains an LFE channel. The
indicator under the LFE lights during actual playback of
the LFE signals (LFE signals are not present in all parts
of the soundtrack).
# Program Format indicator
When a Dolby Digital or DTS signal is input, he following
indicators light to show the channels being played back.
L : Left front* 1 * 2 , C : Center*
LS : Left surround*
RS : Right surround*
*1: Indicates 5.1ch Dolby Digital or DTS playback.
*2: Indicates Dolby Pro Logic playback.
- =
VOLUME
dB
TAPE 2
Surround/dts mode on the
PRO LOGIC lights
Surround/dts mode on the
1 , R : Right front* 1 * 2
1 2
,S : Surround (mono)* ,
1
,