Keyboard - Toshiba Satellite Pro S300 Maintenance Manual

4.9 Keyboard

4.9 Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-14 to 4-17.
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the
frame and do not touch the keytop.
1. Turn over the computer.
2. Insert your fingers into the slits and release both sides of latches of the KB holder at the
rear.
Slit
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)
KB holder
Figure 4-14 Removing the KB holder (1)
4 Replacement Procedures
Slit
[CONFIDENTIAL] 4-27